RO-R2-500X4 Prime 500 Watt 4 Channel Amplifier
MSRP
- RO-R2-500X4
Description
No Internet sales, Please call your rep for details
Rockford Fosgate's Prime Series R2-500X4 amplifier can power four speakers with 75 watts RMS each, so you'll hear your music loud and clear over the noises of the wind and road. You could also use this amp in bridged, 2-channel mode to power a couple of subwoofers with 250 watts RMS each. High- and low-pass filters help you get maximum performance from the speakers in your vehicle.
Product highlights:
- 4-channel car amplifier
- 75 watts RMS x 4 at 4 ohms
- 125 watts RMS x 4 at 2 ohms
- 250 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
- CTA-2006 compliant
- Class-D amplifier design
- Variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels
More Info:
- C.L.E.A.N. gain setup system includes clip lights
- Auto remote turn-on
- Preamp and speaker-level inputs
- Preamp outputs
- Wiring, fuse, and hardware not included with amplifier
- 4-gauge power and ground leads and an 80-amp fuse recommended
- Dimensions: 10-1/16"W x 2"H x 7.75"D
Includes:
- Rockford Fosgate R2-500X4 owner's manual
- 4-Channel amplifier
- Two 7" Speaker input harnesses
- 3mm Allen Hex key
- Four 3/4" Screws
- 4 Flat washers
- Installation and Operation instructions (English/ French/ Spanish/ German/ Italian)
- Certificate of Performance
- Rockford Fosgate contact information
No Internet sales, Please call your rep for details
Rockford Fosgate's Prime Series R2-500X4 amplifier can power four speakers with 75 watts RMS each, so you'll hear your music loud and clear over the noises of the wind and road. You could also use this amp in bridged, 2-channel mode to power a couple of subwoofers with 250 watts RMS each. High- and low-pass filters help you get maximum performance from the speakers in your vehicle.
- 4-channel car amplifier
- 75 watts RMS x 4 at 4 ohms
- 125 watts RMS x 4 at 2 ohms
- 250 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
- CTA-2006 compliant
- Class-D amplifier design
- Variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels
- C.L.E.A.N. gain setup system includes clip lights
- Auto remote turn-on
- Preamp and speaker-level inputs
- Preamp outputs
- Wiring, fuse, and hardware not included with amplifier
- 4-gauge power and ground leads and an 80-amp fuse recommended
- Dimensions: 10-1/16"W x 2"H x 7.75"D
- Rockford Fosgate R2-500X4 owner's manual
- 4-Channel amplifier
- Two 7" Speaker input harnesses
- 3mm Allen Hex key
- Four 3/4" Screws
- 4 Flat washers
- Installation and Operation instructions (English/ French/ Spanish/ German/ Italian)
- Certificate of Performance
- Rockford Fosgate contact information
